JTAG and Debug Overview
Table of Contents
GSG
GSG:Debugging projects
GSG:Using BIOS
how to create and debug a project using BIOS http://processors.wiki.ti.com/index.php/GSG:Using_BIOS
GSG:Common target configurations
Target Configuration - Custom Configurations
GSG:Adding GEL files to a target configuration
- Configuring a GEL file
- With the target configuration editor open, select the tab Advanced at the bottom.
- Expand the configuration and select the connection that corresponds to the core that will be configured.
- On the box initalization script provide the location of the GEL file obtained from the board manufacturer.
GSG:Connecting to slave cores in SoC devices
GSG:Automation and Scripting
http://processors.wiki.ti.com/index.php/GSG:Automation_and_Scripting
Debug Server Scripting (DSS) is a set of cross platform Java APIs to the Debug Server which allow scripting through Java or 3rd Party tools such as JavaScript (via Rhino), Java) , Python (via Jython), TCL (via Jacl/Tclblend), etc. JavaScript is the default (and preferred) scripting language supported by DSS.
Without GUI, Debug Server Scripting
Linux Debug in CCSv5
Debugging JTAG Connectivity Problems
Spectrum Digital JTAG Emulator FAQ
DBGJTAG Graphical User Interface
Blackhawk
USB100v2(XDS100)
- JTAG EMULATION DRIVER DOWNLOAD
- Firmware Updates for the Blackhawk XDS100-class product
- TI XDS100 Wiki Support Page
- reprogam it
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/131875.aspx?pi24928=2 go back to http://processors.wiki.ti.com/index.php/XDS100#Q:_How_can_I_check_if_the_VID.2FPID_for_the_EEPROM_are_programmed_correctly.3F note the part that says
Note:It is possible to reprogram the EEPROM using MPROG or FTProg and the .ept file. The .ept file depends on the type of device you have. If you have a FT2232C device download the following FT2232C EPT file. If you have a FT2232H device download the following FT2232H EPT file. Refer to the instructions in the How to make an XDS100 section
JTAG Connectors(Hardware Pins)
TI Emulation FAQ
spectrumdigital JTAG Emulator Utilities
http://emulators.spectrumdigital.com/utilities/
- SDConfig and SDConfigEx
- SDFlash
- PRG2xx F24x/F240x DOS command line programming utility
- JTAG Adapters
- SDXMLGUI